When I first got interested in clocks and watches, I bought a lot of 3 old wind-up alarm clocks -- I think paying about $12 for the 3. They are "Baby Ben" clocks, and of course there are people who collect them and assign names to every model and such.
Apparently Baby Bens were made by Westclox. My idea (like others) was to start out learning clock repair by working on these, but the problem is that they were meant to be throw-away items and are not at all friendly to repair. The warning is that a person getting interested in clock repair (like myself), could very well get frustrated and give up on the whole enterprise by screwing with one of these. A general tip is to not try to disassemble one, but to slosh the movement in solvent (naptha, or just gasoline if you are brave/foolish), dry it out good, then lubricate appropriately and there is a good chance it will be working again.After the cleaning, the following is recommended:
Here is an amazing detailed and meticulous restoration of a 1927 Baby Ben:
Tom's notes / [email protected]